CARVING WHEELS
Please click on the images below to see tool specifications.

PART NUMBER

DIAMETER

BORE SIZE

TEXTURE SIZE

COLOR

DW250	2.00"	3/8"	#50 FINE	YELLOW
DW270	2.00"	3/8"	#70 MEDIUM	GREEN
DW290	2.00"	3/8"	#90 COARSE	ORANGE

* For use on Merlin ® / Proxxon ® and Arbortech ® grinding units.

PART NUMBER

DIAMETER

BORE SIZE

TEXTURE SIZE

COLOR

SD250	2.00"	3/8"	#50 FINE	YELLOW
SD270	2.00"	3/8"	#70 MEDIUM	GREEN
SD290	2.00"	3/8"	#90 COARSE	ORANGE

* For use on Merlin ® / Proxxon ® and Arbortech ® grinding units.

PART NUMBER

DIAMETER

BORE SIZE

TEXTURE SIZE

COLOR

CR250	2.00"	3/8"	#50 FINE	YELLOW
CR750	2.00"	3/8"	#70 MEDIUM	RED
CR290	2.00"	3/8"	#90 COARSE	GREEN
CR125	2.00"	3/8"	#125 EX-COARSE	ORANGE

* For use on flex-shaft and die grinders

PART NUMBER

DIAMETER

BORE SIZE

TEXTURE SIZE

COLOR

CR13450	1-3/4"	3/8"	#50 FINE	YELLOW
CR13470	1-3/4"	3/8"	#70 MEDIUM	RED
CR13490	1-3/4"	3/8"	#90 COARSE	GREEN
CR134125	1-3/4"	3/8"	#125 EX-COARSE	ORANGE

* For use on flex-shaft and die grinders

PART NUMBER

DIAMETER

BORE SIZE

TEXTURE SIZE

COLOR

DW450	4.00"	5/8" & 7/8"	#50 FINE	YELLOW
DW470	4.00"	5/8" & 7/8"	#70 MEDIUM	RED
DW490	4.00"	5/8" & 7/8"	#90 COARSE	GREEN
DW4125	4.00"	5/8" & 7/8"	#125 EX-COARSE	ORANGE

* For use on most 4" and 4-1/2" angle head grinders; Specify bore size ordering.

PART NUMBER

DIAMETER

BORE SIZE

TEXTURE SIZE

COLOR

SD450	4.00"	5/8" & 7/8"	#50 FINE	YELLOW
SD470	4.00"	5/8" & 7/8"	#70 MEDIUM	RED
SD490	4.00"	5/8" & 7/8"	#90 COARSE	GREEN
SD4125	4.00"	5/8" & 7/8"	#125 EX-COARSE	ORANGE

* For use on most 4" and 4-1/2" angle head grinders; Specify bore size ordering.

Please Note:

• Not for use on METAL or CERAMICS.
• Safety: Always use approved eye protection and safety devices!
• Sizes: Coated diameters are nominal and may very in size by .150"
• Recommended Operating Speed: 4,000 to 24,000 RPM’S