1/4” SHANK BURRS
For use on flex-shaft and die grinders.
* Please specify color when ordering: GREEN (coarse) ORANGE (extra coarse)
* Also available in 6mm shank (please specify when ordering)

Please click on the images below to see tool specifications.

SHAPE

PART NUMBER

HEAD DIAMETER

HEAD LENGTH

BALL NOSE	14BN14	1/4"	1-3/4"
BALL NOSE	14BN12	1/2"	3/4"
BALL NOSE	14BN58	5/8"	3/4"
BALL NOSE	14BN34	3/4"	1-1/4"

* Specify color when ordering: YELLOW (fine) GREEN (coarse) ORANGE (extra coarse)

SHAPE

PART NUMBER

HEAD DIAMETER

HEAD LENGTH

CYLINDER	14C14	1/4"	1-3/4"
CYLINDER	14C12	1/2"	3/4"
LONG-CYLINDER	14C58L	5/8"	1-1/4"
CYLINDER	14C34	3/4"	1-1/4"

* Specify color when ordering: YELLOW (fine) GREEN (coarse) ORANGE (extra coarse)

SHAPE

PART NUMBER

HEAD DIAMETER

HEAD LENGTH

CYLINDER (SMOOTH END)	14C14SE	1/4"	1-3/4"
CYLINDER (SMOOTH END)	14C12SE	1/2"	3/4"
LONG-CYLINDER (SMOOTH END)	14C58LSE	5/8"	1-1/4"
CYLINDER (SMOOTH END)	14C34SE	3/4"	1-1/4"
CYLINDER (SMOOTH END)	14C1SE	1.00"	1.00"
NEW! CYLINDER (RADIUS END)	14C1R2	1.00"	1.00"

* Specify color when ordering: YELLOW (fine) GREEN (coarse) ORANGE (extra coarse)

SHAPE

PART NUMBER

HEAD DIAMETER

HEAD LENGTH

FLAME	14F38	3/8"	3/4"
FLAME	14F12	1/2"	3/4"
FLAME	14F34	3/4"	1-1/4"

* Specify color when ordering: YELLOW (fine) GREEN (coarse) ORANGE (extra coarse)

SHAPE

PART NUMBER

HEAD DIAMETER

HEAD LENGTH

SPHERE	14S12	1/2"	1/2"
SPHERE	14S58	5/8"	5/8"
SPHERE	14S78	7/8"	7/8"

* Specify color when ordering: YELLOW (fine) GREEN (coarse) ORANGE (extra coarse)

SHAPE

PART NUMBER

HEAD DIAMETER

HEAD LENGTH

TAPER (FINE & COARSE ONLY)	14T14	1/4"	1-3/8"
TAPER	14T12	1/2"	1.00"
TAPER	14T34	3/4"	1-1/4"

* Specify color when ordering: YELLOW (fine) GREEN (coarse) ORANGE (extra coarse)

SHAPE

PART NUMBER

HEAD DIAMETER

HEAD LENGTH

ROTOSAW (FINE & COARSE ONLY)	14RS34	3/4"	1/4"
ROTOSAW (FINE & COARSE ONLY)	14RS100	1.00"	1/4"
ROTOSAW (FINE & COARSE ONLY)	14RS125	1-1/4"	1/4"

* Specify color when ordering: YELLOW (fine) GREEN (coarse)

Please Note:

• Not for use on METAL or CERAMICS.
• Safety: Always use approved eye protection and safety devices!
• Sizes: Coated diameters are nominal and may very in size by .150"
• Recommended Operating Speed: 4,000 to 24,000 RPM’S